Pricing guide
Front and back labelling machine pricing is driven by the container, label, output target and the amount of automation needed around the labeller. Comparing only headline machine cost can miss sensors, conveyors, coding, installation and changeover requirements.
A compact twin-side labeller is normally specified for lower-volume production, trials and factories with limited space. Automatic systems are selected when the output target, integration requirement or product range needs a stronger line-ready setup.
Flat, oval, tapered or lightweight containers can need more handling control. Clear labels, film labels or unusual label gaps may require specific sensors and additional setup work.
Budget should include conveyor interfaces, coding, inspection, product spacing, guarding, installation, commissioning and operator handover where required.
Next step
The most useful enquiries include the physical pack, label roll details, target output and any existing equipment the labeller must sit between. This helps avoid unsuitable machinery suggestions and makes the quote route faster.
Related guides
Choose the right machine route.
Prepare the details needed for a faster quote.
Compare automation levels.
Plan sensors and material checks.
Send your pack details to Lancing UK and we will help match the right labelling route.
Quotation scope
The machine price is only one part of the project scope. The main variables are the pack-control method, the two applicator heads, sensing, format range, line interfaces and the evidence required to accept the finished system.
| Container control | Flat, oval, tapered, lightweight or handled packs may need different guide, side-belt, spacing or top hold-down arrangements. More demanding control can add engineering, tooling and trial work. |
|---|---|
| Applicator heads | Front and back labels can have different widths, lengths, roll sizes and positions. Each head must have enough adjustment and capacity for the confirmed format range. |
| Label sensing | Paper, opaque film and clear label constructions can need different sensing methods. The quotation should state the label material and the sample basis used to select the sensor. |
| Coding and inspection | Batch coding, barcode checking, label-presence inspection and reject confirmation add interfaces, mounting, controls and acceptance tests beyond basic label application. |
| Conveyors and controls | Infeed spacing, conveyor height, direction, line speed, upstream and downstream signals, accumulation and emergency-stop integration affect the final line scope. |
| Changeovers | A broad pack range may require format parts, adjustable guides, recipes, setting records or tooling. The quotation should separate included formats from future additions. |
| Trials and acceptance | Representative samples, sustained runs, placement measurements, starts and stops, fault recovery and documentation determine how suitability is demonstrated. |
| Installation and support | Delivery access, positioning, utilities, commissioning, operator handover, spare parts and service support should be compared alongside the machine supply. |
Two quotations can describe a “front and back labeller” while including different conveyors, sensors, format ranges, guarding, coding interfaces and acceptance work. Compare every inclusion, exclusion and assumption against the same application brief.
A compact route can suit intermittent production, trials or a smaller footprint when operator loading and product presentation remain practical. An automatic route becomes more relevant when the labeller must accept a controlled continuous feed, coordinate with other machines, manage inspection or reduce routine manual handling.
The compact versus automatic comparison helps separate machine format from the wider labour and integration requirement. Use the enquiry checklist to request comparable quotations.
Send the actual container range, both label specifications, target output and line interfaces so the quotation can state its assumptions clearly.