Compare labelling machines
View the compact, automatic and top/bottom labelling machine options.
Application guide
Two label bottle labelling machine
A two label bottle labelling machine applies separate front and rear labels so branding, ingredients, barcodes and product details can be presented clearly.
On this page
What two-label bottle labelling means
Two-label bottle labelling is different from wrap-around labelling. Instead of one long label wrapping around the container, two separate labels are applied to different faces or positions on the same bottle.
This is common where a front brand label must be visually separate from a rear information label.
- Front branding label and rear ingredient or compliance label.
- Two separate label rolls or formats depending on the machine setup.
- Suitable for flat, oval, square and selected round bottles.
Why twin-side labelling is usually the starting point
A twin side labeller uses two label heads so the front and rear labels can be applied during the same pass. The bottle must be controlled through the label application point so the two labels remain aligned.
The system can be compact or fully automatic depending on the required output and level of line integration.
- Two labels in one pass.
- Independent adjustment of label positions.
- Potential integration with coding and inspection equipment.
What affects accuracy
Accuracy depends on container stability, label feed, sensor setup, wipe-down and product spacing. Bottles with curved panels, tapered sides or poor base stability may need more handling support.
Label material is also important because clear labels and reflective finishes can affect detection.
- Container shape and tolerance.
- Label material, roll direction and gap.
- Guide, hold-down and wipe-down settings.
Quote information to prepare
When asking for a two-label bottle labeller, include both labels and explain how they should sit on the pack. A simple photo with label positions marked can speed up the first machine recommendation.
- Bottle photos from front, side and rear.
- Front and rear label sizes.
- Label material and backing details.
- Required speed and current line layout.
Best next step: Best next step: send Lancing UK your container photo, label dimensions, label material and target output so the right labelling route can be checked before quote stage.
Related routes
Useful next pages
Use these pages to compare nearby machine routes, applications and buyer guides.
Front/back enquiry checklist
Prepare container, label and output details for a faster quotation.
Contact Lancing UK
Send pack photos and label dimensions for practical selection support.
Quick answers
Common questions
Can a machine apply two different labels?
Yes. Twin-side labellers can apply a front label and a rear label, subject to label roll and machine configuration.
Can one operator run a two-label bottle labeller?
This depends on the output, machine type and line layout. Compact systems are often operator-led, while automatic systems are designed for inline production.
Can two labels be applied to round bottles?
Yes in some cases, although round bottles may need different control than flat or oval containers.
Want help with this labelling requirement?
Send pack photos, label sizes, target speed and current line details. Lancing UK can help shortlist the best front/back labelling machine route.
Two-label application
Specify two bottle labels as separate controlled applications
A two-label bottle labelling machine must control the bottle and each label independently. The front and rear labels may use different sizes, materials, roll directions, sensor settings and placement datums even though they are applied in one pass.
Define each label roll
Provide width, length, gap, pitch, face material, liner, core, outside roll diameter and winding direction for both rolls. Do not assume the back label can use the front-head setup.
Define the relationship
State whether the labels must be centred independently, aligned to a common bottle feature or held at a specified angular relationship on a shaped or round container.
Define the inspection
Decide whether the line must detect missing labels, wrong rolls, unreadable codes, skew or placement outside the agreed window, and what happens to a failed pack.
Use the finished label layout to choose the machine route
Flat and oval bottles commonly use opposing twin-side heads. Round bottles may need additional orientation if the two labels must keep a fixed relationship. A single continuous label around the circumference should be compared with a specialist wraparound labeller instead.
Evidence to request from a sample trial
- Both label rolls run together.
- Measurements for the front and rear labels separately.
- Starts, stops and restart behaviour.
- The most difficult bottle and label combination.
- Changeover settings and approved first-off samples.
Qualify the complete two-label bottle process
Send the bottle samples, both label rolls, target output and placement requirements for a machine comparison.